SEPCO 219 FLAX / PTFE PUMP PACKING
Construction: Square Braid
Features: Highest quality vegetable fiber. All bark, coarse and short fibers have been removed.
Treatment: Impregnated with PTFE dispersion and a special break-in oil.
Equipment: Reciprocating and rotary shafts. Stern tube packing.
Recommended For: Brine, cold water and cold oil.
Service Conditions: Shaft speeds to 1885 FPM; temperatures to 220°F/104°C; pH range 5-9.
Remarks: PTFE impregnate acts as: (1) a surface leveler filling any surface voids. (2) a saturant to prevent wicking. (3) a lubricant to reduce friction and heat. (4) a protective shield around the flax fibers, preventing fluid penetration and fiber break down.
SEPCO 219 Packing Approximate Feet per Pound
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO 219 Vegetable Fiber / PTFE Pump Packing cut to your length requirements.
Install SEPCO 219 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO 219 pump packing correctly. Properly installed packing will increase SEPCO 219 packing life, saving valuable product and downtime.
- Additional Information
SEPCO 219 PTFE Impregnated Flax Pump Packing Cross Reference
- Anchor 381 Packing
- Chesterton 329 Packing
- Garlock 5413 Packing
- Palmetto 1613 Packing
- Teadit 2421 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $14.98