SEPCO ML2001P BRAIDED FLEXIBLE GRAPHITE PACKING WITH PASSIVE CORROSION INHIBITOR
Construction: Multi-Lok Braid
Features: Pure homogenous graphite bonded to a fiberglass carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.
Treatment: Surface treated with phosphorus.
Equipment: Pumps and valves, volatile organic chemical service.
Recommended For: Valves where thermal conductivity is required.
Service Conditions: Shaft speeds to 4000 FPM; temperatures to 850°F/454°C in oxidizing conditions; 1200°F/649°C in steam; pH range 0-14 except strong oxidizers.
Note: For valve service, style ML2001Z with a zinc corrosion inhibitor is also available.
SEPCO ML2001P Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML2001P Braided Flexible Graphite Packing cut to your length requirements.
Install SEPCO ML2001P Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML2001P pump packing correctly. Properly installed packing will increase SEPCO ML2001P packing life, saving valuable product and downtime.
- Additional Information
For a complete packing cross reference list, please see our Packing Cross Reference Guide.