SEPCO ML2001W INCONEL WIRE INSERTED BRAIDED FLEXIBLE GRAPHITE VALVE PACKING
Construction:Wire inserted Multi-Lok braid - reinforced with inconel wire
Features: Pure homogenous graphite bonded to a fiberglass carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.
Equipment: Valves, volatile organic chemical service.
Recommended For:Valves where thermal conductivity is required.
Service Conditions:Temperatures to 850°F/454°C in oxidizing conditions; 1200°F/649°C in steam; pH range 0-14 except strong oxidizers.
SEPCO ML2001W Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML2001W Inconel Wire Inserted Braided Flexible Graphite Packing cut to your length requirements.
Install SEPCO ML2001W Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML2001W pump packing correctly. Properly installed packing will increase SEPCO ML2001W packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML2001W Inconel Wire Inserted Braided Flexible Graphite Valve Packing Cross Reference
- Palmetto 5000W Valve Packing
- Teadit 2001IC Valve Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $15.36