SEPCO ML2001Z BRAIDED FLEXIBLE GRAPHITE PACKING WITH ZINC CORROSION INHIBITOR
Construction: Multi-Lok Braid
Features: Pure homogenous graphite bonded to a fiberglass carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.
Treatment:Surface treated with zinc.
Equipment: Pumps and valves, volatile organic chemical service.
Recommended For:Valves where thermal conductivity is required.
Service Conditions: Shaft speeds to 4000 FPM; temperatures to 850°F/454°C in oxidizing conditions; 1200°F/649°C in steam; pH range 0-14 except strong oxidizers.
Note: For valve service, style ML2001P with a passivating corrosion inhibitor is also available.
SEPCO ML2001Z Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML2001Z Braided Flexible Graphite Packing cut to your length requirements.
Install SEPCO ML2001Z Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML2001Z pump packing correctly. Properly installed packing will increase SEPCO ML2001Z packing life, saving valuable product and downtime.
- Additional Information
Cross Reference No
You may also be interested in the following product(s)
Starting at: $14.98