SEPCO ML4002 Hollow Core ePTFE/Graphite Packing

SEPCO ML4002 Hollow Core ePTFE/Graphite Packing

Construction: Multi-Lok braid over hollow core silicone center
Features: Finely ground particles of the highest quality graphite in a ePTFE matrix to control graphite migration.
Treatment: None.
Equipment: Rotating pumps, mixers, agitators.
Recommended For: All corrosive applications suitable for ePTFE and graphite.
Service Conditions: Temperatures to 550°F/287°C; pH range 0-14.

HOLLOW CORE PACKING
SEPCO’s Hollow Core packings are specifically designed to seal large rotating equipment like mixers and agitators. Testing has proven that a high quality braided packing with a silicone rubber core will outlast conventional packing in applications associated with excessive shaft deflection on large shafts.
Styles: All packing styles are available in Hollow Core design.
Sizes Available: 1/2” and up.
Core Material: Silicone; standard (others upon request).
Hollow Core: For rotating equipment.

SEPCO ML4002HC Packing Approximate Feet per Pound

NOTE: The values on this table are approximate.  The tolerances are typically +/- 10%.  If you need an exact packing length, please request a quote and we can provide SEPCO ML4002HC ePTFE/Graphite Packing cut to your length requirements.

Install SEPCO ML4002HC Packing Properly

The pump packing installation and packing cutting instructions will help you install your SEPCO ML4002HC pump packing correctly.  Properly installed packing will increase SEPCO ML4002HC packing life, saving valuable product and downtime.