SEPCO ML4004 YELLOW JACKET PACKING, BRAIDED GFO WITH KEVLAR KEVLAR CORNERS
Construction: Multi-Lok Braid
Features: A combination braid of PTFE/Graphite composite yarn and aramid fibers. This construction provides the strength of aramid fibers and the heat dissipating and lubricating qualities of the PTFE and graphite matrix.
Treatment: Light coat of an inert break-in oil.
Equipment: Paper mill stock pumps, agitators, or any service where strength and good lubricating qualities are needed.
Recommended For: All type paper mill applications where graphite is suitable.
Service Conditions: Shaft speeds to 2500 FPM; temperatures to 500°F/260°C; pH range 3-11.
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML4004 Braided GFO/Kevlar Packing cut to your length requirements.
Install SEPCO ML4004 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML4004 pump packing correctly. Properly installed packing will increase SEPCO ML4004 packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML4004 Yellow Jacket Packing, Braided GFO with Kevlar Corners Cross Reference
- Chemstar 165K Packing
- Crane C1064 Packing
- Garlock 41616 (PM-6K) Packing
- Garlock PM-6K (41616) Packing
- Palmetto 1359 Packing
- SEPCO ML3600A Packing
- Teadit 2017 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $14.98
Starting at: $53.95