SEPCO ML4444 GRAPHITE PACKING
Construction: Multi-Lok Braid
Features: The highest quality chemically resistant graphite yarns are twisted together and braided in a Multi-Lok fashion. This packing has as extremely low coefficient of friction. The light weight yarn provides more feet of length per pound than standard non-asbestos or PTFE packings. Graphite is a heat conductor and dissipates heat in the stuffing box, permitting higher shaft speeds and less leakage than other packings.
Equipment: All rotating and reciprocating shafts, valves and agitators.
Recommended For: Strong caustics, acids, chemicals and high pressure steam.
Service Conditions: Temperatures to 1200°F/649°C in steam; 800°F/427°C in oxidizing atmospheres; pH range 0-14; not recommended for fuming nitric acid, oleum and fluorine.
SEPCO ML4444 Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML4444 Graphite Packing cut to your length requirements.
Install SEPCO ML4444 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML4444 pump packing correctly. Properly installed packing will increase SEPCO ML4444 packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML4444 Graphite Fiber Packing Cross Reference
- Anchor 1342 Packing
- Anchor 1343 Packing
- Chemstar 160 Packing
- Crane 1625G Packing
- Garlock G200 Packing
- Palmetto 1550 Packing
- Teadit 2001 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $15.36