SEPCO ML4700 Nomex Packing
Construction: Multi-Lok Braid
Features: Nomex® yarns are coated in PTFE suspensoid. This system of impregnation assures even distribution of the PTFE particles. Packing has a light inert oil treatment. Nomex® is a white aramid fiber which is tough but less abrasive to shafts or sleeves than typical aramid products.
Equipment: All reciprocating and rotating shafts.
Service Conditions: Shaft speeds to 2000 FPM; temperatures to 550°F/287°C; pH range 1-13.
Note: Nomex® is a registered trademark of E. I. du Pont de Nemours and Company.
Most metric sizes in stock.
Most metric sizes in stock.
SEPCO ML4700 Nomex® Packing
Construction: Multi-Lok Braid
Features: Nomex® yarns are coated in PTFE suspensoid. This system of impregnation assures even distribution of the PTFE particles. Packing has a light inert oil treatment. Nomex® is a white aramid fiber which is tough but less abrasive to shafts or sleeves than typical aramid products.
Equipment: All reciprocating and rotating shafts.
Service Conditions: Shaft speeds to 2000 FPM; temperatures to 550°F/287°C; pH range 1-13.
Note: Nomex® is a registered trademark of E. I. du Pont de Nemours and Company.
SEPCO ML4700 Nomex® Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML4700 Nomex® packing cut to your length requirements.
Install SEPCO ML4700 Nomex® Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML4700 Nomex® pump packing correctly. Properly installed packing will increase SEPCO ML4700 Nomex® Packing life, saving valuable product and downtime.
Cross Reference | SEPCO ML4700 Nomex® Packing Cross Reference
For a complete packing cross reference list, please see our Packing Cross Reference Guide. |
---|
-
Flexible packing hook with replaceable corkscrew tip
Starting at $17.96