SEPCO ML8002HC HOLLOW CORE HIGH SPEED PTFE GRAPHITE PUMP PACKING
Construction: Multi-Lok braid over hollow core silicone center
Features: PTFE fibers specially treated with finely ground particles of graphite to increase thermal conductivity and reduce thermal expansion resulting in higher shaft speeds.
Treatment: Lubricated with a proprietary high speed lubricant.
Equipment: All reciprocating and rotating shafts.
Recommended For: All corrosive applications suitable for PTFE and graphite.
Service Conditions: Shaft speeds to 4900 FPM; temperatures to 550°F/287°C; pH range 0-14.
HOLLOW CORE PACKING
SEPCO’s Hollow Core packings are specifically designed to seal large rotating equipment like mixers and agitators. Testing has proven that a high quality braided packing with a silicone rubber core will outlast conventional packing in applications associated with excessive shaft deflection on large shafts.
Styles: All packing styles are available in Hollow Core design.
Sizes Available: 1/2” and up.
Core Material: Silicone; standard (others upon request).
Hollow Core: For rotating equipment.
SEPCO ML8002HC Hollow Core Packing Cross Reference
Garlock Chesterton Chemstar Palmetto Teadit --- 1760SC --- --- ---
SEPCO ML8002HC Hollow Core Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML8002HC Hollow Core High Speed PTFE Graphite Pump Packing cut to your length requirements.
Install SEPCO ML8002HC Hollow Core Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML8002HC pump packing correctly. Properly installed packing will increase SEPCO ML8002 packing life, saving valuable product and downtime.
- Additional Information
Cross Reference No
You may also be interested in the following product(s)
Starting at: $15.36