SEPCO ML4002 Pump Packing - 100% GFO Graphite Filled PTFE Packing
Construction: Multi-Lok Braid
Features: Finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. 100% GFO® Yarn.
Equipment: All reciprocating and rotating shafts.
Recommended For: All corrosive applications suitable for PTFE and graphite.
Service Conditions: Shaft speeds to 4400 FPM; temperatures to 550°F/287°C; pH range 0-14.
Note: SEPCO is a participant in the W. L. Gore Seal of Assurance Program. SEPCO ML4002 PTFE/graphite packing merits the 100% GFO® Brand.
GFO® is a registered trademark of W. L. Gore and Associates.
SEPCO ML4002 Packing Approximate Feet per Pound
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML4002 100% GFO PTFE/Graphite Packing cut to your length requirements.
Install SEPCO ML4002 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML4002 pump packing correctly. Properly installed packing will increase SEPCO ML4002 packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML4002 100% Gore GFO Packing Cross Reference
- American Braiding 8000T Packing
- Anchor 1128 Packing
- Chemstar 165 Packing
- Chesterton 1750 Packing
- Crane C1065 Packing
- Garlock 5100 Packing
- Garlock PM6 Packing
- Palmetto 1389 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $14.98