SEPCO ML402 GRAPHITE IMPREGNATED PACKING
Construction: Multi-Lok Braid
Features: Synthetic, non-asbestos fibers treated with a specially formulated blend of lubricants having a saxoline base.
Treatment: Each strand is individually coated with graphite and the braid is surface coated with graphite.
Equipment: General service on rotary and reciprocating equipment.
Recommended For: Mild acids, alkalies, steam, brine, oil.
Service Conditions: Shaft speeds to 1885 FPM; temperatures to 450°F/232°C; pH range 4-10.
Remarks: Good general service packing. The lubrication formulation makes the extra difference. The ductile nature of the lubricant prevents wicking and provides superior sealability.
Feet per Pound for SEPCO ML402 Graphite Impregnated Packing
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML402 Graphite Impregnated Packing cut to your length requirements.
Install your SEPCO ML402 graphite impregnated packing properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML402 pump packing correctly. Properly installed packing will increase SEPCO ML402 packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML402 Graphite Impregnated Packing Cross Reference
- Anchor 1319 Packing
- Anchor 1333 Packing
- Chemstar 1398 Packing
- Chemstar 1430 Packing
- Chesterton 1315 Packing
- John Crane 1340 Packing
- Garlock 41602 (PM-2) Packing
- Garlock 8913 Packing
- Garlock PM-2 (41602) Packing
- Palmetto 1007AF Packing
- Teadit 2255 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $14.98
Starting at: $337.76