SEPCO ML4800 ARAMID FIBER PUMP PACKING
Construction: Multi-Lok Braid
Features:Non-asbestos aramid fiber.
Treatment:Each strand is individually treated with a PTFE coating and a light, inert oil.
Equipment:Rotating and reciprocating shafts. All equipment handling tough abrasive products.
Recommended For: General service, caustics, mild acids, chemicals, air, oil gases, solvents, general chemical plant applications.
Service Conditions:Shaft speeds to 1900 FPM; temperatures to 500°F/260 °C; pH range 3-11.
SEPCO ML4800 Packing Approximate Feet per Pound
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML4800 Aramid Pump Packing cut to your length requirements.
Install SEPCO ML4800 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML4800 pump packing correctly. Properly installed packing will increase SEPCO ML4800 packing life, saving valuable product and downtime.
- Additional Information
SEPCO ML4800 Aramid Fiber Pump Packing Cross Reference
- Anchor 1335 Packing
- Chesterton 1740 Packing
- Crane K1730 Packing
- Garlock 5200 Packing
- Garlock PM5 Packing
- Palmetto 1350 Packing
- Teadit 2004 Packing
For a complete packing cross reference list, please see our Packing Cross Reference Guide.
You may also be interested in the following product(s)
Starting at: $320.87
Starting at: $15.36