SEPCO ML6225 PTFE Impregnated TEK-PRO Aramid Fiber Packing

SEPCO ML6225 TEK-PRO PACKING

Construction: Multi-Lok Braid
Features: A proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the body of the packing. The PTFE suspensoid thoroughly impregnates, seals and fills all voids providing better resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties.
Equipment: Rotating and reciprocating pump and valve equipment, mixers and agitators.
Recommended For: Pulp and paper mill applications, recovery pumps, chemical applications, caustic soda. An excellent all around general service chemical packing.
Service Conditions: Shaft speed to 1885 FPM; temperatures to 550°F/ 288°C; pH range 3 - 12.
Note: The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing.

SEPCO ML6225 Packing Approximate Feet per Pound

* NOTE: The listed feet per pound values are approximate.  The tolerances are typically +/- 10%.  If you need an exact packing length, please request a quote and we can provide SEPCO ML6225 PTFE Impregnated TEK-PRO Aramid Fiber Packing cut to your length requirements.

Install SEPCO ML6225 Packing Properly

The pump packing installation and packing cutting instructions will help you install your SEPCO ML6225 pump packing correctly.  Properly installed packing will increase SEPCO ML6225 packing life, saving valuable product and downtime.