- Description
-
Details
SEPCO ML6225A ARAMID REINFORCED PACKING
Construction: Multi-Lok Braid
Features: A proprietary blend of non-asbestos TEK-PRO yarns treated with PTFE throughout the packing. The PTFE suspensoid thoroughly seals and fills all voids providing better resistance to chemical attack. A light lubricant is applied under pressure to improve run-in properties. The corner tracks are made from an Aramid filament yarn to reduce extrusion and increase pressure and strength characteristics.
Equipment: Rotating and reciprocating pump and valve equipment, mixers and agitators.
Recommended For: Pulp and paper mill applications, recovery pumps, chemical applications, caustic soda. A good all-around general service chemical packing.
Service Conditions: Shaft speeds to 1885 FPM; temperatures to 550°F/260°C; pH range 3-12.
Note: A superior general purpose packing. The TEK-PRO yarns retain a greater volume of PTFE dispersion and are more uniformly distributed to provide longer and better sealing.SEPCO ML6225A Packing Approximate Feet per Pound
* NOTE: The listed feet per pound values are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML6225A Aramid Reinforced Packing cut to your length requirements.
Install SEPCO ML6225A Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML6225A pump packing correctly. Properly installed packing will increase SEPCO ML6225A packing life, saving valuable product and downtime.
- Additional Information
-
Additional Information
Cross Reference No
You may also be interested in the following product(s)
-
PTFE Flexible Lantern Ring Material / Universal Seal Cage
Starting at: $337.76
-
Flexible packing hook with replaceable corkscrew tip
Starting at: $14.98