SEPCO ML8002 HIGH SPEED PTFE GRAPHITE PUMP PACKING
Construction: Multi-Lok Braid
Features: PTFE fibers specially treated with finely ground particles of graphite to increase thermal conductivity and reduce thermal expansion resulting in higher shaft speeds.
Treatment: Lubricated with a proprietary high speed lubricant.
Equipment: All reciprocating and rotating shafts.
Recommended For: All corrosive applications suitable for PTFE and graphite.
Service Conditions: Shaft speeds to 4900 FPM; temperatures to 550°F/287°C; pH range 0-14.
SEPCO ML8002 Packing Cross Reference
Garlock Chesterton Chemstar Palmetto Teadit --- 1760 3165 1382 2007
SEPCO ML8002 Packing Approximate Feet per Pound
NOTE: The values on this table are approximate. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML8002 Braided PTFE Graphite Pump Packing cut to your length requirements.
Install SEPCO ML8002 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML8002 pump packing correctly. Properly installed packing will increase SEPCO ML8002 packing life, saving valuable product and downtime.
- Additional Information
Cross Reference No
You may also be interested in the following product(s)
Starting at: $14.98
Starting at: $337.76