SEPCO ML8004 High Speed PTFE/Graphite/Aramid Corner Packing

SEPCO ML8004 BRAIDED PTFE GRAPHITE/ARAMID CORNER PUMP PACKING

Construction: Multi-Lok Braid
Features: The PTFE fibers are specially treated with finely ground particles of graphite to increase thermal conductivity and reduce thermal expansion. The corners are made of an aramid filament yarn to reduce extrusion and increase pressure and strength characteristics.
Treatment: Light coat of inert break-in oil.
Equipment: Paper mill stock pumps, agitators or any service where strength and good lubricating qualities are needed.
Recommended For: All type paper mill applications where graphite is suitable.
Service Conditions: Shaft speeds to 2500 FPM; temperatures to 500°F/260°C; pH range 3-11.

SEPCO ML8004 Packing Approximate Feet per Pound

NOTE: The values on this table are approximate.  The tolerances are typically +/- 10%.  If you need an exact packing length, please request a quote and we can provide SEPCO ML8004 Braided PTFE Graphite/Aramid Corner Pump Packing cut to your length requirements.

Install SEPCO ML8004 Packing Properly

The pump packing installation and packing cutting instructions will help you install your SEPCO ML8004 pump packing correctly.  Properly installed packing will increase SEPCO ML8004 packing life, saving valuable product and downtime.