SEPCO SS574 Slurry Packing

SEPCO SS574 Slurry Packing

SEPCO SS574 slurry packing is made of continuous filament polyimide in its natural color and impregnated with PTFE dispersion during the braiding process.  SEPCO SS574 contains a BLUE identifying tracer pertinent to the dredging and marine industry.

Features: SEPCO SS574 packing is a Multi-Lok braided construction of continuous filament polyimide in its natural color and impregnated with PTFE dispersion during the braiding process. SEPCO SS574 contains a BLUE identifying tracer pertinent to the dredging and marine industry.

Recommended: This packing can be used in a wide range of applications due to its chemical, temperature and wear resistance. Recommended services include pulp and paper applications such as stock pumps, pulpers, digesters, agitators, and mixers handing paper stock, liquors and caustics. General applications include mild acids and solvents as well as wastewater and sludge pumps in water treatment plants. Marine industry uses include salt and brine pumps.

Limitations:

• Shaft Speeds to 2500 FPM
• Temperatures to 550 deg F (290 deg C)
• pH Range 1 to 12
• Pressure to 500 PSI (3450 kPaG)

SEPCO SS574 Packing Approximate Feet per Pound

* NOTE: The listed feet per pound values are approximate.  The tolerances are typically +/- 10%.  If you need an exact packing length, please request a quote and we can provide SEPCO SS574 Slurry Packing cut to your length requirements.

Install SEPCO SS574 Packing Properly

The pump packing installation and packing cutting instructions will help you install your SEPCO SS574 pump packing correctly.  Properly installed packing will increase SEPCO SS574 packing life, saving valuable product and downtime.