SEPCO 2225 GENERAL SERVICE, PTFE/SYNTHETIC/OIL PACKING
Construction: Plait Braid
Features: Yarns are coated in PTFE suspensoid. This system of impregnation assures even distribution of the PTFE. The fibers are saturated and sealed with the PTFE particles, protecting the fibers from chemical action.
Surface Treatment: A surface coating of PTFE is applied after braiding. To assure good break-in characteristics, a special high temperature synthetic lubricant is added.
Equipment: General service on rotary and reciprocating pumps, agitators.
Recommended For: Caustics, mild acids, difficult chemicals, air, gases, solvents, oils, general chemical plant applications.
Service Conditions: Shaft speeds to 1885; temperatures to 500°F/260°C; pH 3-11.
SEPCO ML2225 packing is the same as SEPCO 2225 packing except multi-lok braided.
* SEPCO 2225 Approximate Feet per Pound
NOTE: The listed feet per pound values are approximates. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO 2225 Square Braid PTFE/Synthetic/Oil Pump Packing cut to your length requirements.
Install SEPCO 2225 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO 2225 pump packing correctly. Properly installed packing will increase SEPCO 2225 packing life, saving valuable product and downtime.
- Additional Information
Cross Reference No
You may also be interested in the following product(s)
Starting at: $320.87
Starting at: $15.36