SEPCO ML2225 PTFE Impregnated Synthetic Packing
Construction: Multi-Lok Braid
Features: Yarns are coated in PTFE suspensoid. This system of impregnation assures even distribution of the PTFE. The fibers are saturated and sealed with the PTFE particles, protecting the fibers from chemical action.
Surface Treatment: A surface coating of PTFE is applied after braiding. To assure good break-in characteristics, a special high temperature synthetic lubricant is added.
Equipment: General service on rotary and reciprocating pumps, agitators.
Recommended For: Caustics, mild acids, difficult chemicals, air, gases, solvents, oils, general chemical plant applications.
Service Conditions: Shaft speeds to 1885 FPM; temperatures to 500°F/260°C; pH 3-11.
SEPCO 2225 packing is the same as SEPCO ML2225 packing except square braided.
Most metric sizes in stock.
SEPCO ML2225 PTFE/SYNTHETIC/OIL PUMP PACKING
Construction: Multi-Lok Braid
Features: Yarns are coated in PTFE suspensoid. This system of impregnation assures even distribution of the PTFE. The fibers are saturated and sealed with the PTFE particles, protecting the fibers from chemical action.
Surface Treatment: A surface coating of PTFE is applied after braiding. To assure good break-in characteristics, a special high temperature synthetic lubricant is added.
Equipment: General service on rotary and reciprocating pumps, agitators.
Recommended For: Caustics, mild acids, difficult chemicals, air, gases, solvents, oils, general chemical plant applications.
Service Conditions: Shaft speeds to 1885 feet per minute; temperatures to 500°F/260°C; pH 3-11.
SEPCO 2225 packing is the same as SEPCO ML2225 packing except plait braided.
SEPCO ML2225 Packing Approximate Feet per Pound
* NOTE: The listed feet per pound values are approximates. The tolerances are typically +/- 10%. If you need an exact packing length, please request a quote and we can provide SEPCO ML2225 PTFE/Synthetic/Oil Pump Packing cut to your length requirements.
Install SEPCO ML2225 Packing Properly
The pump packing installation and packing cutting instructions will help you install your SEPCO ML2225 pump packing correctly. Properly installed packing will increase SEPCO ML2225 packing life, saving valuable product and downtime.
Cross Reference | SEPCO ML2225 PTFE Impregnated Synthetic Packing Cross Reference
For a complete packing cross reference list, please see our Packing Cross Reference Guide. |
---|
-
Flexible packing hook with replaceable corkscrew tip
Starting at $18.68
-
PTFE Flexible Lantern Ring Material / Universal Seal Cage
Starting at $353.76